JUKI’sentrance model JM-50 is the cheapest version of our THT machines. Anyhow, it is packed with great features. New flexible feeders increase the component range to be handled at a time. This leads to superior productivity and faster change over. In addition new “Mini Chuck Nozzles” support a wide range of components, reducing cycle time,decreasing tooling costs and simpyfying programming.
The new “Takumi head” has 4 nozzles and is equipped with a height-adjusting laser to optimize speed. This head can handle a wide range of components while maintaining the maximum speed.
New flexible feeders and new “Mini Chuck Nozzles” increase component range that can be handled at a time.
1 time clamping 50 × 50 mm ~ 410 × 360 mm 2 times clamping 50 × 50 mm ~ 800 × 360 mm
max. 30 mm
Laser recognition: 0603 (metric) ~ 50 mm (square) 3 D Sensor: 3 mm (square) ~ 40 x 25 mm
Vacuum: *0.6 sec / part
*Under the conditions specified by JUKI
Laser recognition: ± 0.05 mm (3 σ) Vision recognition: ± 0.04 mm
Tape feeder in case of 8 mm tape: 56 (Optional Knock cyinder unit is required)
MRF-S Radial Feeder 18
(9 on each of Front and Rear side)
MRF-L Radial Feeder 14
(7 on each of Front and Rear side)
MAF-S Axial Feeder 14
(7 on each of Front and Rear side)
MAF-L Axial Feeder 10
(5 on each of Front and Rear side)
200 to 415 V AC 3-phase
2.2 kVA
0,5 ± 0,05 MPa
75 L / min
1,454 × 1,505 × 1,450 mm
1,300 kg
Maximum up to 2.000 kg
Specifications and design subject to change without notice.
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
